Materiale Data | Masseflyde g/cm3 | Hårdhed Shore |
Trækstyrke N/mm2
|
Elasticitetsmodul % | Temp. C | Datablad PDF |
VITON |
2,44 | Shore A | 11,7 +/- 15% | 154 +/-20% | -20/+210C | |
FPM-FDA | 2,62 | Shore A | 7,7 +/-15% | 160 +/-20% | -25/+210C | |
FPM | 1,88 | Shore A | 11,5 +/- 20% | 180 +/-20% | -25/+210C |
VITON
This material is a brown Fluorocarbon elastomer, commonly known under the trade mark VITON or Flourel has durability against all types of greases, lubricants and solvents. And it has a good resistance against many chemicals. It functions very properly in vacuum-systems and in case of applications requiring low gas permeability. Viton keeps its elasticity between -20°C and +210°C. It is recommended for applications where its outstanding resistance to heat, chemicals, weathering and ozone is required.
FPM-FDA
This material is a brown Fluorocarbon elastomer, commonly referred to as VITON* and FPM. FPM materials have a very high resistance to hydraulic fluids, chemicals and a number of organic
compounds and operate in temperatures between -25 to +210°C. It is recommended for applications where its outstanding resistance to heat, chemicals, weathering and ozone is required.
It is approved for the use of applications in contact with foodstuff.
FPM
This material is a black Fluorocarbon elastomer, commonly referred to as VITON* and FPM. FPM materials have a very high resistance to hydraulic fluids, chemicals and a number of organic
compounds and operate in temperatures between -25 to +210°C. It is recommended for applications where its outstanding resistance to heat, chemicals, weathering and ozone is required.